When the job demands serious, reliable power and you don’t want a noisy beast roaring in your back yard or job-site, this 24 kVA Yanmar-powered unit is your go-to. It delivers at prime load 22 kW / 22 kVA (standby 24 kW / 24 kVA) on single phase 240 V, with a solid hard-wired connection. Built around a YANMAR 4-cylinder diesel engine (model 4TNV98–GGE), water-cooled, at 1500 rpm — that means quieter, longer life, less fuss. The super-silenced canopy keeps noise down to about 60 dB at 7 metres (that’s roughly a normal conversation level), so you’re less likely to face neighbour complaints or restrictions when working close to residences or mixed‐use sites. With a 110 litre tank and approx. 17 hours continuous prime-load runtime at ~6.7 L/hr consumption, you’re set for a full day (and beyond) without constant refuelling. The chassis is lockable, powder-coated weather-resistant, with sound-deadening and stainless-steel fittings — built for WA’s tough outdoor and harsh conditions. Whether you’re running site power for a large build in Perth metro, setting up backup for a retail space, or doing a major event, this unit brings weight, performance and whisper-quiet delivery. We offer pick-up at our Perth depot or delivery across metro and fringe zones.
Key Features & Benefits
-
Prime Power: 22 kW / 22 kVA; Standby: 24 kW / 24 kVA.
- 2 x 15 Amp IP66 (single phase) | 1 x 20 Amp IP66 & 1 x 32 Amp IP66 (three phase) outlets
-
Single Phase | Power Factor = 1.0.
-
Noise Level: ~60 dB at 7 metres.
-
Running Time at prime load: ~17 hours.
Why This Generator is Ideal for Perth Jobs
Working in Perth means dealing with high ambient temperatures, dusty sites, sometimes tight access, and if you’re near residential zones or mixed-use developments you also care about noise. This generator ticks all those boxes: the water-cooled Yanmar engine helps maintain performance in the heat, the 60 dB sound level means it behaves more like “quiet hum” than “loud roaring beast”, and the lockable, robust canopy makes it suitable for outdoor setups that might see rain, dust or rough handling. With 110 L fuel capacity and ~17 hour run time, you’re less likely to stop mid-project for refuelling. The single-phase 240 V with strong current capability gives strong flexibility for big tools, site lighting, backup circuits. In short: for your next major job (warehouse fit-out, large commercial site, event stage setup, suburb-fringe construction), you’re set.
Typical Use Cases
-
Full-site power for a mid to large scale construction project in the Perth metro or fringe: run multiple power tools, lighting towers, site hut, air-con units.
-
Commercial backup for retail centres, small industrial units or offices during shutdowns: enough to carry lighting, security and moderate HVAC loads.
-
Large event or festival power in Perth/WA: outdoor loads, marquees, food vans, staging—where you need noise down and power up.
-
Remote or fringe-area jobs (Rockingham, Mandurah, Swan Valley) where you still need robust capability in tougher conditions.
Specifications
| Prime Power | 22.0kW | 27.5kVA |
|---|---|
| Standby Power | 24kW | 30kVA |
| Phase/Power Factor | Three Phase | 0.8 Power Factor |
| Voltage | 415 |
| Frequency | 50 Hertz |
| Engine | Yanmar 4TNV98-GGE |
| RPM | 1500 |
| Cooling Method | Water Cooled |
| Alternator | High Quality 3 Phase 4 Pole Brushless Synchronous -/c AVR |
| Starter System | 12-volt Electric – Battery Included |
| Controller | Comap MRS16 IL4 (European Made) | 2 Wire / Remote Start Capable |
| Noise Level | 60 dBA at 7m |
| Fuel Tank Capacity(Litres) | 100 |
| Running Time | 15 Hours Continuous (prime load) |
| Fuel Consumption | 6.7 L/hr (prime load) |
| Mine Spec | Mine site ready bunding |
| Hardwire Terminals | Yes |
| Power | 38 Amps |
| Outlets | 2 x 15 Amp IP66 (single phase) | 1 x 20 Amp IP66 & 1 x 32 Amp IP66 (three phase) |
| Chassis | Lockable | Sound Deadening | Weather-reistant powder coating |Stainless steel fittings |
| Compliance | RCD: Australian Standard (IP67 Enclosed) |
| Overload Capacity | Over Current Protection |
| Weight (KG) | 810 |
| Shipping Weight (KG) | 810 |
| Length(cm) | 172 |
| Width(cm) | 76 |
| Height(cm) | 115 |
| Shipping Length | 172 |
| Shipping Width | 76 |
| Shipping Height | 172 |
Perth Service & Support You Can Rely On
We’ve got a Perth depot (Bentley WA) with tubs, trucks, logistics and support built for WA site conditions. When you book this generator, we’ll ensure it’s tank-filled, load-tested, canopy locked, ready to roll. You’ll also get orientation on how to wire the hard-wired terminals, safe operation in the WA climate, and a phone number for support — because even the best generator only works if someone sets it up smartly.
Hire Terms & Delivery Info (Quick–Glance)
-
Minimum hire term: 1 day (and yes, a week might make more sense given the size).
-
Standard hire: Daily, weekend, weekly – long term available on enquiry.
-
Delivery: Perth metro standard included; outer regions/fringe via quote.
-
Pick-up: From Perth depot in Bentley.
-
Optional extras: ATS (automatic transfer switch) compatible, remote-start kit, fuel-monitoring addon, forklift slots for easier on-site management.
-
Booking: Online via site or phone — we’ll confirm availability, delivery/pick-up slot and ensure readiness.
Frequently Asked Questions
-
Do I need to bring leads/cables? Yes – this unit uses hard-wired heavy-duty terminals (no standard plug). We can recommend cable sizing to suit your load.
-
Can it run continuously? Yes — with the 110 L tank and ~6.7 L/hr consumption you’re good for ~17 hours at prime load. If you lighten the load then runtime extends.
-
Is 60 dB really quiet? Under test it is (7 m distance, free field), but on-site conditions (reflective surfaces, enclosures) may raise apparent noise – allow some margin.
-
Will it handle variable loads (tools starting/stopping)? Yes – the brushless alternator with AVR ensures stable power even when loads shift.
-
What if the project overruns? You just call us before your hire term ends and we’ll extend the hire or swap units if needed.
-
What about delivery outside Perth metro? We can quote for outer WA, fringe, even some regional jobs — just ask when you book.