Need quiet, reliable power on site without hauling around a massive trailer set? This 6 kVA low-profile Yanmar unit is the Perth workhorse. Water-cooled so it doesn’t chuck a tantrum in WA heat, properly silenced (about 68 dB at 7 m), and fitted with 1×32A plus 2×15A 240V outlets so you can run tools and lighting at the same time. Australian compliant with full RCD & M.E.N. wiring, so your supervisor won’t grumble. Hire it for a day, weekend, or longer — we can drop it anywhere in the metro.
Good for: smaller construction jobs, events, temporary backup, farm sheds, shop fit-outs.
Powered by: Yanmar diesel, brushless alternator, built for long hours.
Key Features & Benefits
-
Yanmar diesel engine: proven reliability under continuous load.
-
Brushless alternator: cleaner power, less electrical noise — ideal for sensitive equipment.
-
Water-cooled system: better thermal control in WA heat, less derating risk.
-
Low-profile canopy: easier to manoeuvre, fits tighter spaces, less wind exposure.
-
Silenced at ~68 dB @ 7 m: compliant for events/residential proximity; quieter than many rival units.
-
1 × 32 A + 2 × 15 A outlets (240 V): true flexibility for multi-tool setups or mixed lighting & power.
-
AU compliant (RCD & MEN): up to code, easier to pass site or event inspections.
-
Remote start option available: useful for standby or less-supervised scenarios.
-
2-year / 2,000 h warranty: demonstrates confidence in build quality and gives you reliability peace of mind.
Why This Generator is a Smart Choice for Perth Jobs
Working in Perth often means battling the midday sun, tight site layouts or residential event settings, and time pressure. This unit is engineered with those exact challenges in mind. The water-cooled Yanmar engine won’t overheat under dusty, hot conditions; the low profile means it can fit under eaves, alongside scaffolding or into laneways; the 68 dB sound level means you’re less likely to get neighbour complaints or need extra sound-mitigation for evening events. With multiple outlets, you won’t have to daisy-chain boxes and risk voltage drop or overloads. And because it’s fully AU-wired with RCD & MEN, your site supervisor won’t be turning up with extra paperwork or red tape. In short: less fuss, more uptime, cleaner power, local delivery — the trifecta for Perth-based hire.
Typical Use Cases
-
On-site power for small construction or refurbishment jobs: site hut, lighting, tools,-cut-off saw, compressors.
-
Event power hire in Perth suburbs or outer-fringe: outdoor weddings, marquees, food stalls, pop-up stores — you need something quiet and capable.
-
Temporary backup power for shop fit-outs during overnight shutdowns: keep the cold room off, lighting on, tools ready.
-
Remote or rural jobs near Perth (Joondalup, Mandurah, Rockingham): the water-cooled engine handles tougher conditions where air-cooled models might struggle.
Perth Service & Support You Can Rely On
We’ve got a Perth-based depot, experienced technicians on call, and a logistics team familiar with WA traffic and job-site access. Whether you pick up or we deliver, we’ll confirm the unit’s ready, full tankled, load-tested and on-site when you need it — not when it’s convenient for us. We also provide full orientation: set-up tips, safe use guidance, and emergency contact details. Because even the best kit needs smart use.
Hire Terms & Delivery Info (Quick‐Glance)
-
Short-term hires: 1-day minimum, weekend rates available.
-
Long-term hire: flexible monthly terms; enquire for tiers.
-
Delivery: Perth metro standard; outer WA fringe on quote.
-
Pick-up: Available from our Perth depot — drop-off check-in faster.
-
Optional extras: Fuel management, optional automatic transfer switch (ATS), site-monitoring module.
-
Booking: Online or via phone — see availability instantly; you’ll get confirmation and pickup/delivery slot.
Frequently Asked Questions
-
Do I need to supply my own leads and cables? Yes — standard 32 A or 15 A leads supplied by you unless you upgrade via us.
-
Can this unit run continuously overnight? Yes, within spec. Water-cooling helps; fuel consumption will depend on load; ask our team for estimates.
-
What happens in Mandurah or Joondalup? No issue: we service metro plus outer-fringe — delivery available with prior booking.
-
Is the noise really just 68 dB? Under standard test load and location (7 m from canopy) yes — remember site conditions (reflective surfaces, enclosures) may raise apparent noise.
-
What if the project runs over time? Easy: just call before your hire term ends and we’ll extend or swap units as needed.
Specs:
| Prime Power : | 5.5 kW / 5.5 kVA 240Volts 23Amps |
| Standby Power : | 6 kW / 6 kVA |
| Power Factor : | 1 |
| Phase Voltage : | Single Phase 240 Volt |
| Frequency : | 50 Hertz |
| Engine : | Yanmar 2 Cylinder 2TNV70-HGE |
| Engine Capacity: | 0.57 Litre |
| RPM : | 3,000 per minute |
| Cooling Method : | Water Cooled – Rated For Australia’s North |
| Alternator : | Single Phase 2 Pole Brushless Synchronous -/c AVR |
| Starter System : | 12-volt Electric – Battery Included |
| Minespec Padlockable Battery Isolator (INCLUDED) | |
| Controller : | Smartgen HGM4010NC |
| 2 Wire / Remote Start Capable | |
| Over Temperature Protection | |
| Over Current Protection | |
| Low Oil Protection | |
| Safety Systems : | Battery Isolator |
| Emergency Stop | |
| Failsafe Shutdown Fuel Solenoid | |
| Noise Level : | 68 dBA at 7 metres |
| Fuel Tank Capacity : | 28 Litres (-/c Fuel Gauge) |
| Running Time : | 12 Hours Continuous (prime load) |
| Fuel Consumption : | 2.4 litres/hour (prime load) |
| Chassis Enclosure : | Lockable |
| Sound Deadening Throughout | |
| Weather-Resistant Powder Coating | |
| Stainless Steel Fittings | |
| External Use | |
| Mine Site Ready Bunding : | Yes (Optional) |
| ATS (Mains Failure) : | Easy Connect Plug (ATS Box Optional) |
| Single Phase Outlets : | 1x32AMP 2 x 15 Amp IP66 |
| Three Phase Outlets : | No |
| Hardwire Terminals : | No |
| RCD / RCBO : | Australian Standard (IP67 Enclosed) |
| Options : | Automatic Start Systems |
| GSM | |
| Timer | |
| Wireless Remote | |
| Solar System Compatible (Majority) | |
| ATS (Mains Failure Detection / Auto Transfer Switch) | |
| Weight : | 298 kg |
| Dimensions : | 107 L x 62 W x 70 H cm |